Dexter 8 on 6.5in Hub & Drum Kit For 9-10KGD Axles After 07/2009 8-430-5UC3

Dexter 8 on 6.5in Hub & Drum Kit For 9-10KGD Axles After 07/2009 8-430-5UC3

by Dexter Axle

$658.58

Quantity

8-430-5UC3

Description

Dexter Hub & Drum W/ 8 on 6.5" Bolt Pattern For 9,000lb & 10,000lb GD Dexter Axles Manufactured After 07/2009

Dexter hub & drum kit. This redesigned two piece hub & drum will work as a direct replacement for the one piece(8-415-2) hub & drums that were used between 7/2009 and 4/2013. This two piece design comes standard on Dexter axles made after 04/2013. There is no need to worry about the races as they are already pressed into the hub for you. You will also get the oil seal, bearings, oil cap, wheel nuts and retaining ring for the hub. This hub is designed for use with 9-10K GD axle spindles. Each hub has a capacity if 5,000lbs. The 12-1/4" x 3-3/8" drum is already mounted to the hub for ease of installation. Spindle nut and washer sold separately.

Items in Kit:

• 1 387A Inner Bearing (2.25" ID)
• 1 25580 Outer Bearing (1.75" ID)
• 1 25520 Outer Race (Already Pressed In) 3.265" OD
• 1 382A Inner Race (Already Pressed In) 3.813 OD
• 1 10-51 Oil Seal (2.875" x 3.88")
• 1 21-88 Oil Cap
• 1 46-32 EZ Oil Cap Plug
• 8 6-109 Coned Wheel Nuts
• 1 33-52-1 Wheel Retaining Ring
• 1 8 on 6.5" Hub only
• 5,000lb Capacity Per Hub
• 1 12-1/4" x 3-3/8" drum installed

To determine the bolt circle on hubs or wheels with an even number of studs, measure center-to-center of studs directly across from each other on the diameter(bolt patterns are always measured in inches). Example: 8 on 6 1/2 would mean 8 studs with 6 1/2” center-to-center diameter.

For Electric Break 9-10,000lbs Backing Plates (LH: EB01-140, RH: EB01-145)

9K-10K Hub & Drums

Dexter 8 on 6.5in Hub & Drum Kit For 9-10KGD Axles After 07/2009 8-430-5UC3

Dexter Axle

You recently viewed

Subscribe

Follow us

Main menu