
#84 1.75K Spindle w/1.75X6.5 Round Stub & Hardware R2061-284
Dexter Axle
R2061-284 Description #84 1.75K Spindle w/1.75X6.5 Round Stub & Hardware• Fits hubs with L68149 & L44649 bearings• Includes nut, washer, an...
View full detailsR2061-284 Description #84 1.75K Spindle w/1.75X6.5 Round Stub & Hardware• Fits hubs with L68149 & L44649 bearings• Includes nut, washer, an...
View full detailsR40484 Description #84 1.75K Spindle w/2X4 Round Stub & Hardware• Fits hubs with L68149 & L44649 bearings• Includes nut, washer, and cotter...
View full details5-71 Description 1-1/2" tang type spindle washer for 9-10K general duty spindles.
RDR901 Description 1 1/4in ID Recessed Zinc Tie Down D-ring• The 1-1/4" x 3" d-ring swivels 360°• The mounting holes are 5-3/8" center to center ac...
View full detailsSL150 Description 1-1/2 x 2.332 Single Lip Grease Seal for Ag Hubs• 1.5” ID• 2.332” OD
12192TB Description Grease seal for standard or EZ-Lube 2k axles with BT8 spindles(see dimensions below). • 1.25" ID x 1.979" OD• Has a double lip ...
View full details10-40 Description 1.938 x 2.51 Single Lip Grease Seal For Mobile Home/Utility Hubs• 1.938” ID• 2.51” OD• Qty. 1
UBGC12X206X631 Description Galvanized Square U-bolt• Galvanized to resist corrosion• 1/2"-13 (Rod diameter - threads per inch) • 6-5/16" long• 2-1/...
View full details165649 Description Cotter Pin Usually used for spindles, this cotter pin is 1/8" x 1-3/4" with an overall length of 2-1/4"
120″ Long, 5,000 LB Capacity Per Ramp 10′ Ramps: 120″ Long x 15″ Wide x 3.25″ Thick Maximum 5,000 LB Capacity (1 Set = 10,000 LB)
7-244 Description Mounting bolts for 10k HD-15k Dexter 2-piece Hub & Drums. 1/2"-13 x 1-3/4"These Mounting bolts are used to mount hub to the d...
View full detailsV1641 Description This is a 10,000lb Rated ratchet assembly that is 12' long with twisted snap hook on one end and a grab hook on the active end an...
View full detailsV1631 Description This is a 10,000lb Rated ratchet assembly that is 12' long with twisted snap hook on one end and a "Mini J" Hook on the active en...
View full detailsV1621 Description This is a 10,000lb Rated ratchet assembly that is 12' long with twisted snap hook on one end and a "R" Hook on the active end and...
View full detailsV3330 Description 12' long 2,500 lb Rated Ratchet Assembly with Loop and 2 s hook end fittings. Made with Super strong 6,000lb rated 1" wide webbin...
View full detailsPart # V3301 12' Maximum length 2,500 lb Rated ratchet assembly with snap hook end fittings. Made with super strong 6,000lb rated 1" wide webbing, ...
View full detailsV1611 Description This is a 10,000lb Rated ratchet assembly that is 12' long with twisted snap hook on one end and a "T" Hook on the active end and...
View full details144″ Long, 4,000 LB Capacity Per Ramp 12′ Ramps: 144″ Long x 15″ Wide x 3.25″ Thick Maximum 4,000 LB Capacity (1 Set = 8,000 LB)
LNHACKSL211 Description LYNX 14" 205/75R14 Aluminum This tire and wheel combination is commonly used on Aluma Trailers part number 51135.
168″ Long, 4,000 LB Capacity Per Ramp 14′ Ramps: 168″ Long x 15″ Wide x 3.25″ Thick Maximum 4,000 LB Capacity (1 Set = 8,000 LB)
723 Description 14oz Tube MAG1 Hi-temp Red Wheel Bearing Grease • 14oz Tube• Works for trailer hub, rotor, and bearing applications.• Not recommend...
View full detailsWH156-6CS Description Replacement steel wheel. These wheels have all the benefits of painted wheels with a chrome plated finish. • 15" x 6" • Chrom...
View full detailsWHIDS166-80E Description Replacement steel wheel for dual wheel applications(axles with 2 wheels per side). • Fits axles that have a 4.75 pilot(th...
View full detailsV3400 Description 16' Maximum length 3,000 lb Rated ratchet assembly with metal claw hook and d-ring end fittings. Made with super strong 6,000lb r...
View full detailsNewsletter Sign Up
Copyright © 2021 NexAge Trailer Parts.