Dexter 5 on 4.5in EZ-Lube Hub Kit 1 1/16in Spindle For 2K Axles 8-259-5UC1-EZ

SKU 8-259-5UC1-EZ



Dexter Hub W/ 5 on 4.5" Bolt Pattern- 1 1/16"" Spindle For 2,000lb Axles

Dexter hub kits come with some of your main components like the inner and outer bearings.  There is no need to worry about the races as they are already pressed into the hub for you.  You will also get the grease seal, grease cap, and wheel nuts for the hub.  This hub is designed for use with a 1 1/16" diameter spindle. Each hub has a capacity of 1,250lb.  Spindle nut and spindle washer sold separately.

Items in Kit:
• 2 L44649 Inner and Outer Bearings (1.063" ID)
• 2 L44610
 Inner and Outer Races(Already Pressed In) 1.98" OD
• 1 10-60 Grease Seal (1.5" x 1.987")
• 1 21-41-1 Grease Cap (1.986" OD)
• 1 85-1 Grease Cap Plug
• 5 X1023R Coned Wheel Nuts
• 1 5 on 4.5" Hub
• 1,250lb Capacity Per Hub

To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3

You recently viewed

Clear recently viewed